Xbox Self Repair Diy Guide | Movies news movie trailers

Posts Tagged ‘xbox self repair diy guide’

How to Fix My Xbox With an Xbox 360 Repair Service

Posted by XboxMaster on May 26th, 2010 No Comments

In this article I will be discussing with you a way to fix a Xbox 360′s Red Ring of Death (RROD). The repair outlined in this article does not include towels or solder guns. This method is not some back-alley method that might destroy your console if you were to apply it. This is a simple, easy, and safe method that was developed by a Computer Technician/Programmer who discovered the solution to the RROD about two years ago. It should be noted that this method is a self-fix-it method that will require you to repair your console. Please note that this is a general outline of the repair method to demonstrate the simplicity and authenticity of this repair. The actual repair guide itself responsible for bringing this repair to light is available for anyone who wishes to make this repair.

How to Fix a Xbox 360

An Xbox 360 can be fixed with only two changes made to the motherboard. These are very simple modifications and can be made by anyone, even if you haven’t any technical experience at all. Let me first explain that in order to protect the motherboard from overheating issues (which is what causes the RROD) there is a thermal compound paste that is layered over the Graphics Processing Unit (GPU) and the Central Processing Unit (CPU). These are two very important computer chips on the motherboard that are responsible for some of the primary functions of the Xbox 360, and which essentially allow you to play and enjoy the system. For some reason, the thermal paste that is already on the GPU and CPU does not hold up against the heat emitted by the Xbox 360. This paste is insufficient and allows your system to overheat — eventually resulting in the RROD. The first mod that needs to be made, is to switch out this old paste and apply a new, and more sufficient paste that has a higher heat tolerance than the old one.

Once the new thermal paste has been applied and your GPU and CPU are essentially well protected it’s time to make the second and last modification. This modification involves the heat sinks on the motherboard itself. Originally the heat sinks were held in place by the X-Clamps, but again the heat that is emitted from the Xbox 360 itself causes problems in this area. If the X-Clamps had a higher heat tolerance than this modification would probably not be required, and you wouldn’t need figure out how to fix a Xbox 360. But since they are also insufficient another mod. is required. This mod. involves removing the X-clamps and installing a sturdier, and more reliable foundation for the motherboard. This is done by placing a set of screws and washers on both sides of the motherboard, locking the heat sinks in place. Let me explain: In order for the Xbox 360 to run properly everything needs to be running in balance and in sync with each other. When the system get’s hot, and creates to much heat (to much for the motherboard to handle) the motherboard will start to bend. Originally the X-Clamps were supposed to help prevent this, but since they are insufficient the modification we make sure this doesn’t happen again. Safe xbox 360 repairs

As you can see the modification to fix a Xbox 360 is really simple and doesn’t require that you make any potentially disastrous repairs to your system at all. This is probably the only known repair that is available that has actually been solving the RROD problem. What’s even better here is that it takes no longer than an hour to make this repair, meaning you can have your system repaired by today. It’s either that or forking out a wad of cash and waiting weeks to see your system again if you chose to send it into the manufacturer. Many people are finding that using a self-fix-it method (preferably this one) they are having far more successful results that sending their console to the manufacturer. So if you happen to be in the same dilemma I would strongly suggest that you give this consideration if you really need to fix a Xbox 360 from the RROD.

To get more information on this repair, and the repair guide that shows you how to fix a Xbox from the RROD as mentioned above, you can visit 360profix.com for further information and details. This site was created to help Xbox 360 owners find accurate and helpful information about the RROD and what they can do NOW to repair their system.

Posted in Xbox 360

How to Fix an Xbox 360 If it is Suffering From the Three Red Rings of Death

Posted by XboxMaster on May 19th, 2010 No Comments

Xbox 360 is the finest gaming console and playing on the gaming console is a thrill to feel. The more you play the console, the more you indulge in the gaming over longer periods. This overindulgence in playing the console makes it overheated and you are confronted with the ominous 1 red light error flashing on the power button.3rl repair error

Besides the 1 red light error, you also meet the e74 error at the bottom of the screen which is found due to the damage of the HANA Scaler chip. The excess heat which if not get the outlet, damages the important scaler chip. To avoid this error being found, you need to cool down your Xbox 360 console and let the excess heat released. Unless and until the console comes to the normal temperature the screen of the console will show you the e74 error and the 1 red light will be blinking on the power button. Xbox bottom left light blinks

Albeit the console comes to the normal temperature and the error still reads e74, you are left with two options to deal with the problem. Firstly, if your console is within warranty period, then better to send it to the Microsoft service center for the free of charge repair. Here you have to wait for almost a month until you get back the console repaired. Secondly, if your warranty is expired, then it is best to proceed with the self-repair method.

For this use, a professional guide that will show you step-by-step instruction to unscrew, fix the problem and reassemble your Xbox 360 console. Be choosy about the guide that it should contain high quality video tutorials that will make your fixing the 1 red light error or e74 error an easygoing process. To fix the error you should neither to be a techno-wiz, nor do you need specific fancy tools. Even if you are novice, you can fix the problem following the professional guide. A simple screwdriver set is sufficient to repair your console at home and within an hour you can easily repair your console. The only need is to have a professional guide for the self-repair process Xbox self repair diy guide.

Posted in Xbox 360

Xbox 360 Red Light Error – Three Red Lights Repair

Posted by XboxMaster on May 15th, 2010 No Comments

Are you having Xbox 360 problems with red lights? This article will explain them all and show you what you need to do for rlod error repair.

Xbox 360 Problems with Red Lights: What Do The Different Red Lights Mean?

1. 1 red light: this means you are having general hardware failure, see the next section.

2. 2 red lights: this means your console is overheating. Turn it off right away to avoid damage.

3. 3 red lights: the most common of Xbox 360 errors. This is more famously know as the red ring of death (or rrod). See the next section for how to deal with these red lights.

4. 4 red lights: the solution to these 4 red lights is simple. Your AV cable is loose. You need to check the connection or replace if necessary.

Xbox 360 Problems : Red Lights 1 & 3

1 and 3 red lights both mean you have a loose GPU. Your GPU comes loose as the motherboard heats up. This heat loosens the soldering holding the GPU. Once the GPU comes loose you have Xbox 360 problems with 1 or 3 red lights.

How Do I Fix Xbox 360 Problems With 1 or 3 Red Lights?

You should consult a professional Xbox 360 repair guide before doing anything. They have pictures that make the whole process easy as pie for us average Joe gamers who know nothing about technical stuff.

However, here is how you fix Xbox 360 problems with 1 or 3 red lights so can see how easy it is. By fixing your Xbox 360 problems with red lights yourself you are saving over $100 and the 6 weeks it would take sending it for repairs. At home Xbox 360 repair is safe and fast (it takes about an hour).

Xbox will not turn on Best of all, once you fix your Xbox 360 problems with red lights properly you will never have the red lights again! You will be able to game again without that nagging fear of your Xbox 360 freezing up.

In a nut shell here is how you fix Xbox 360 problems with 1 or 3 red lights:

1. Take the case off

2. Remove the DVD drive

3. Take the x-clamp and heat sink off

4. Clean the CPU and GPU

5. Put some thermal compound on the GPU ($1 tubes of this can be found at any computer store)

6. Put 2 washers above and below the heat sink screws on the motherboard

7. Put it back together. Done

See, there is a solution to Xbox 360 problems with red lights for us non-technical gamers. Again, if you need help with this process and step by step instruction, see a professional Xbox self repair diy guide.

Posted in Xbox 360