Safe Xbox 360 Repairs | Movies news movie trailers

Posts Tagged ‘Safe xbox 360 repairs’

Need Xbox 360 Repair Parts For Xbox 360 Repairs? Probably Not As This Guide Shows!

Posted by XboxMaster on June 26th, 2010 No Comments

If you need Xbox 360 repair parts for an Xbox 360 repair, you should read this article. I will show you how to fix your system without buying Xbox 360 repair parts. Note: This article covers the Xbox 360 repair for red light errors and graphics freezing, this is not a DVD drive repair guide, or a general Xbox 360 troubleshooting guide. Safe xbox 360 repairs

Now first of all, if think you need Xbox 360 repair parts to fix the red ring of death (which I assume you have) you should know this: only 6% of red ring of death Xbox 360s actually need Xbox 360 repair parts. That means that there is a 94% chance you don’t need Xbox 360 repair parts, just a little tweak (and some basic tools) will get the job done.

The Cause of Xbox 360 Red Lights

The cause of Xbox 360 red lights is heat. As the motherboard heats up, it vibrates. As the motherboard vibrates the GPU (graphics processing unit) comes loose. Once the GPU comes too loose, your system freezes. You may think you need Xbox 360 repair parts to fix this, but you don’t as I will show you in a moment.

A warning: Do not use the towel trick to fix your system. Some people say you can wrap your system in a towel and overheat it. If you do this, you will cause permanent damage and you really will need Xbox 360 repair parts. You have been warned.

How to fix the red ring of death once and for all

Let’s get right to it.

First of all, before you do anything, I highly (highly!) recommend you consult a professional Xbox 360 repair guide. It will have videos that can guide you through this step by step.

For those of your who are nervous about opening your system up, don’t worry. This is a safe and easy Xbox 360 repair guide that doesn’t require new Xbox 360 repair parts. It is done with basic household tools and you do not need technical skills. rlod error repair

Here is what you do to fix your Xbox 360 red ring of death without new Xbox 360 repair parts:

1. Remove the casing (poke out the grayed holes until it “pops” out)

2. Take out the DVD drive and motherboard

3. Flip the motherboard over, and pop the X-clamp under the heat sink (the big silver box) off

4. Unscrew the heat sink and take it off

5. Clean the CPU and GPU with rubbing alcohol and apply a new coat of thermal compound over top (this costs about $1 and is found at any computer store). Heat the area with a heat gun for 25 seconds

6. Put 2 nylon washers under the heat sink and put it back on the motherboard. Also, put 2 nylon washers on the screws and then screw them back onto the heat sink

7. Put everything back together

8. Power it on, and you are done! No Xbox 360 repair parts needed!

Now you know how simple this process is and what the cause of your system freezing and Xbox 360 red lights is (a loose GPU). You also realize that to fix the red ring of death you probably don’t need Xbox 360 repair parts.

Again, I highly suggest you consult a professional Xbox 360 repair guide before you get started. Sending it into Microsoft for repairs is just foolish, it costs $140 and takes 6 weeks. xbox easy repair Way better to do it yourself, especially since you don’t need new Xbox 360 repair parts 94% of the time.

Best of luck with your Xbox 360 repair, and I hope now that you know how to fix it you are not one of those 6% that actually needs Xbox 360 repair parts. The good news is professional Xbox 360 repair guides are cheap, and if it doesn’t work, you get your money back. Happy gaming!

Posted in Xbox 360

Need Xbox 360 Repair Parts For Xbox 360 Repairs?

Posted by XboxMaster on June 16th, 2010 No Comments

Suffering from a broken Xbox 360? Not able to play your favorites games or go on Xbox 360 live? Looking for a way to fix your faulty Xbox 360 and get gaming again quickly? If you answered yes to any of those above questions, then continue reading to learn the best broken Safe xbox 360 repairs tips. By following the advice in this article, you could be gaming again in less than two hours time, for less than $30.

My first major tip for fixing a broken Xbox 360 is that you shouldn’t send your console away to be repaired by Microsoft. Why not? Because you will have to wait at least a month to have your console returned to you. That’s at least 1/12 of your potential gaming for this year lost, all because of a stupid flashing red light error. Instead, you should fix your broken, malfunctioning Xbox 360 yourself.

Before you can fix your Xbox 360 yourself, it’s important to understand why your console is broken in the first place. To keep this short and sweet, the main cause of the “red ring of death” error is overheating. Due to a lack of cooling devices such as heat sinks and fans, too much heat is able to build up too quickly inside the case. This then directly leads to the broken Xbox 360 problem, which is characterized by flashing red lights on the front of the console. xbox 360 overheating repair

In order to fix a broken Xbox 360, you will need to purchase what is known as an xbox 360 manual. You can purchase one of these for less than $30 online, and it will contain video files that will show you how to open your case, determine the fault, and then fix it in a safe and reliable manner. You don’t need expensive tools or equipment to carry this repair method out; all you need are a couple of spare hours and $30.

I think you’ll agree that it is worth spending a small amount of money to be able to play your Xbox 360 again as quickly as possible.

Posted in Xbox 360

How to Fix My Xbox With an Xbox 360 Repair Service

Posted by XboxMaster on May 26th, 2010 No Comments

In this article I will be discussing with you a way to fix a Xbox 360′s Red Ring of Death (RROD). The repair outlined in this article does not include towels or solder guns. This method is not some back-alley method that might destroy your console if you were to apply it. This is a simple, easy, and safe method that was developed by a Computer Technician/Programmer who discovered the solution to the RROD about two years ago. It should be noted that this method is a self-fix-it method that will require you to repair your console. Please note that this is a general outline of the repair method to demonstrate the simplicity and authenticity of this repair. The actual repair guide itself responsible for bringing this repair to light is available for anyone who wishes to make this repair.

How to Fix a Xbox 360

An Xbox 360 can be fixed with only two changes made to the motherboard. These are very simple modifications and can be made by anyone, even if you haven’t any technical experience at all. Let me first explain that in order to protect the motherboard from overheating issues (which is what causes the RROD) there is a thermal compound paste that is layered over the Graphics Processing Unit (GPU) and the Central Processing Unit (CPU). These are two very important computer chips on the motherboard that are responsible for some of the primary functions of the Xbox 360, and which essentially allow you to play and enjoy the system. For some reason, the thermal paste that is already on the GPU and CPU does not hold up against the heat emitted by the Xbox 360. This paste is insufficient and allows your system to overheat — eventually resulting in the RROD. The first mod that needs to be made, is to switch out this old paste and apply a new, and more sufficient paste that has a higher heat tolerance than the old one.

Once the new thermal paste has been applied and your GPU and CPU are essentially well protected it’s time to make the second and last modification. This modification involves the heat sinks on the motherboard itself. Originally the heat sinks were held in place by the X-Clamps, but again the heat that is emitted from the Xbox 360 itself causes problems in this area. If the X-Clamps had a higher heat tolerance than this modification would probably not be required, and you wouldn’t need figure out how to fix a Xbox 360. But since they are also insufficient another mod. is required. This mod. involves removing the X-clamps and installing a sturdier, and more reliable foundation for the motherboard. This is done by placing a set of screws and washers on both sides of the motherboard, locking the heat sinks in place. Let me explain: In order for the Xbox 360 to run properly everything needs to be running in balance and in sync with each other. When the system get’s hot, and creates to much heat (to much for the motherboard to handle) the motherboard will start to bend. Originally the X-Clamps were supposed to help prevent this, but since they are insufficient the modification we make sure this doesn’t happen again. Safe xbox 360 repairs

As you can see the modification to fix a Xbox 360 is really simple and doesn’t require that you make any potentially disastrous repairs to your system at all. This is probably the only known repair that is available that has actually been solving the RROD problem. What’s even better here is that it takes no longer than an hour to make this repair, meaning you can have your system repaired by today. It’s either that or forking out a wad of cash and waiting weeks to see your system again if you chose to send it into the manufacturer. Many people are finding that using a self-fix-it method (preferably this one) they are having far more successful results that sending their console to the manufacturer. So if you happen to be in the same dilemma I would strongly suggest that you give this consideration if you really need to fix a Xbox 360 from the RROD.

To get more information on this repair, and the repair guide that shows you how to fix a Xbox from the RROD as mentioned above, you can visit 360profix.com for further information and details. This site was created to help Xbox 360 owners find accurate and helpful information about the RROD and what they can do NOW to repair their system.

Posted in Xbox 360

Dealing With Xbox 360 Overheating Problems

Posted by XboxMaster on April 13th, 2010 No Comments

In this article you are going to learn the reasons, why you may have been experiencing the red ring of death or to get three flashing red lights fix after playing your Xbox 360 over long period of time. And the various solutions you can use, to fix the Xbox 360 e74 error commonly known as the overheating problem. So below I will be outlining the causes and the methods you can use, to do xbox 360 overheating repair so you can get back to what you enjoy doing best which is playing it.

The main cause of the Xbox 360 overheating problem or Xbox e74 error is due to the fact, that the early model Xbox has a design flaw which causes the soldering holding the graphics processing unit in place to melt.

There are primarily two ways to repair an overheating Xbox 360, one is by delivering the console to the Microsoft service centre or else repairing it yourself. A free service is provided by Microsoft for those consoles which are fortunate to be still under warranty. But for others, there is a repair charge fee of over an $140 and a minimum of 2 month lag time, before you receive your console back.

The simple and easiest method to fix the Xbox 360 overheating problem, is by repairing the console yourself. For this you need to watch some videos from the internet, which gives you simple step by step instruction to repair the console.

All this is are just detailed instructions, which shows you how to open up your console case. Then to remove the motherboard which has all of the components such as the video card attached to it. The removal and inspection of the heat sink which is the critical reason, for trouble shooting the red ring of death or Xbox 360 e74 error overheating problem.

You will also need also need screwdrivers, and other various tools which will be outlined in the videos. You can be gaming again in under 2 hours generally if you follow the instructions correctly.All these are useful in getting Safe xbox 360 repairs

Posted in Xbox 360

Learn About Home Based Xbox 360 Repairs and Xbox No Video Output Error Fix

Posted by XboxMaster on March 1st, 2010 No Comments

These days a lot of people are looking for information about how to perform an Xbox no video output error fix, Xbox 360 ring of fire error fix or Xbox bottom left red light fix at home all by themselves and I see whole lot of people are posting their opinions and various tips and tricks regarding the self-fix method to get rid of some common Xbox error codes. However, if you really want to go for an Xbox 360 ring of fire error fix or Xbox 360 no picture error fix at home then I would recommend you to purchase a reliable Xbox repair manual which will show you how to execute the whole repair safely without harming yourself or your Console.

In this article I will tell you how to choose the right manual to go for a home based Safe Xbox 360 repairs. But before going to that part, let’s see when you need to go for a self-fix for your machine.

When Microsoft repair center is no longer the best option

Well when it comes various types of Xbox fixes including Xbox no video output error fix or Xbox 360 ring of fire error fix, Microsoft was considered as the one and only hope for thousands of gamers just a few years back. Now, still I recommend people to send their consoles back to Microsoft for repair works when the machine is under the warranty period. But the bad news is if your console is no longer covered by the warranty, in that case you will have to pay a very high service charge (which often ranges within $100 to $150) to them to get your console fixed. This is when you need to go for the self-fix method to get a cost effective fix for your console.

Getting a reliable Xbox repair guide to fix your console

Now when it comes to going for a self-fix for your machine, you need to make sure that the guide you are using for the job is a reliable one or else your Xbox repair mission can turn in to “mission impossible”. So make sure that the guide that you are planning to purchase is coming up with the following features:

1. Video based repair: This is one of the key features of any top quality Xbox repair. A high quality manual will not only tell you how to perform a Xbox no video output error fix, Xbox 360 ring of fire error fix or Xbox bottom left red light fix but it will show you the entire procedure through video clips as well.

2. A fast fix: This is another important thing that you need to take under consideration while purchasing an Xbox repair guide. If the guide is a good one, it should make sure that you are getting rid of an error within a couple of hours.

3. Money back guarantee: Now, if the developer of a guide is offering you a money back guarantee for their guide in case you are unhappy with the purchase then you can consider that manual to be in your list of top 10 Xbox 360 no video output repair manuals.

Posted in Xbox 360