If you’re apart of the 33% of people who are having problems with their Xbox 360 and need a red ring of death repair, then this article is going to discuss the one method that has been discovered to permanently repair this problem. After 4 years 360 owners have yet to see an official repair from the manufacturer. This problem has finally been put to rest when a computer technician/programmer took the situation into his own hands and discovered the actual repair for this problem. Dealing primarily with protecting the console from overheating this repair is sure to stop the red ring of death and all other errors associated with the console overheating.
In order to repair your Xbox 360 and implement this red ring of death repair it’s important to first understand that this is a repair that will be handled by you. The good thing here is you wont be going it alone. There are fix xbox 360 errors guides out there that walk you step-by-step of the repair process through guided tutorials that show you everything that you need to do. And in this article you are going to see how simple this repair is, hopefully giving you some confidence to undertake the task. This may be 360 owners’ only hope at repairing their console permanently so the use of this method is highly advised.
In order to implement this red rings of death fix it’s important to understand the the Red Ring of Death, and many other errors are the results of your console overheating. Getting the Red Ring of Death does not mean that your console cannot be repaired. It simply means that the GPU (Graphics Processing Unit) and CPU (Central Processing Unit) need to be better protected and the heat sinks positions need to be corrected. The GPU and CPU are basically encoated in a thermal paste to protect them from heat. This paste is unfortunately insufficient and obsolete compared to the actual amount of heat that is produced by the Xbox 360.
What essentially happens is when your console gets too hot the motherboard is directly affected. Under the pressure of the heat, the motherboard begins to bend. This causes the heat sinks, which protect the GPU and CPU to be thrown off balance. When this happens the GPU and CPU are directly exposed to the heat inside of the console. This is what then results in the red ring of death. The GPU and CPU are two vital computer chips necessary to run your 360. When these chips are exposed to too much heat the console shuts itself down to prevent further damage.
Now that you understand why your console has gotten the Red Ring of Death you can better understand how to fix this problem and why this specific red ring of death repair works. Since the GPU and CPU are what is at the root of the problem there is only one solution and it’s very simple. The original thermal paste used to protect these two chips was insufficient and was not designed to hold up to the heat that is created by the 360. The solution is to use a better thermal solution that has a higher heat tolerance. All this requires of you is to remove the old paste, and apply a new one. This modification takes only a few minutes.
Next, we need to prevent the heat sinks from being thrown off balance. Like I said the heat sinks are responsible for protecting the GPU and CPU from heat and to keep them cool. The heat sinks cannot do their job when they are thrown off balance. Originally the heat sinks were held in place by two pieces of hardware known as the ‘X-Clamps’. Unfortunately the X-Clamps cannot withstand the bending of the motherboard, therefore are not a solid foundation for the heat sinks to sit on. They fail to prevent the heat sinks from being thrown off balance so they will need to be removed. The solution here is to use a specific set of washers and screws that will hold the heat sinks to the motherboard directly, instead of indirectly by using the X-Clamps. This will ensure the heat sinks are always positioned over the GPU and CPU keeping them cool as they are supposed to do. This modification only takes a few minutes.
So far after 4 years this red ring of death repair has been the best and only solution to permanently resolve this issue. Thousands of people have already resorted to it and in general takes them less than an hour to complete it. The simplicity of this repair cannot be overlooked and since it provides you with a guaranteed solution it is the best and only way 360 owners are going to repair their console. So I highly recommend if you, or someone you know needs to repair their 360 then this be the method used.It will save time, energy, and money were you to choose otherwise.RROD repair
|
|