Fast Xbox Fixing Guide | Movies news movie trailers

Posts Tagged ‘fast xbox fixing guide’

Getting Any Broken Xbox 360 Repaired Without Tears

Posted by XboxMaster on May 28th, 2010 No Comments

You can do repair xbox 360 yourself and it really isn’t even as hard as you may think. You need to just abide by the directions. You will need some really basic tools and really basic skills. Chances are if you can operate a VCR or DVD player you can fix your Xbox 360. If you have seen the 3 red rings of death then you need to reed this. It will show you how to do your own xbox 360 red ring repair, unless of course your Xbox 360 is still under the warranty. In this case you can get it done for free, though it takes a month to come back. Repairing it your self will void the warranty.

If you repair xbox 360 yourself you will save a lot of money in the end, so if you do not have a warranty I highly recommend it. Microsoft charges a fee of $135.00 and it has no guarantee of a fix. You will just need a few tools and this fast xbox fixing guide to do it yourself. It has been said that around 6% of the systems that need repair fail to work in the end, so that’s a 94% success rate. That is really good right?

You will learn not only be able to repair xbox 360 yourself, but it gives tips and suggestions for correcting xbox 360 freezing errors, and graphical errors. It gives steps in easy to follow organization and can have you ready to do xbox 360 red ring repair yourself in 45 minutes to an hour. I did it myself and it was easy.

The first step to repair xbox 360 yourself is to open up the faceplate. Do not try and remove the top or bottom first or you will run into issues. It should all come out easily so if you have to force anything you are doing something wrong. To get the faceplate of look under the console for finger sized holes, and pull forward on these. it should come right out.

You then want to remove the cover. To do this you will need to free the tabs on the sides and you can do this by using a tool to poke through the vent wholes. You will need to pull up on the cover while at the same time releasing the pins. the way I did it was start at the front of the system and work my way back. Always make sure to not use to much pressure or you will break the pins and be sorry in the end.

You then need to remove the top plate. To do this you need to you have to remove the 3 tabs you can see as well as 3 hidden ones. Going from the front back the first 2 use the wholes where the tray for the drive is located. The xbox opening tool fits perfectly so you should not have any issues. You then want to turn the system upside down. You can see 7 small wholes which have screws inside. You then want to spread the case apart while yo push down on the vent cover. There are a few more pins that connect to the case so when you spread it apart you will here them disconnect. you work your way to the front. you should now have the cover completely off. get xbox 360 repair tools

Posted in Xbox 360

How to Fix the Xbox e74

Posted by XboxMaster on May 25th, 2010 No Comments

Whenever you see the Xbox 360 e74 error message appear on your screen, coupled with the flashing red lights or otherwise known as the red ring of death. What this means is your console is overheating internally.

The major reason this occurs is due to insufficient cooling, internally of the major components within the motherboard of the Xbox 360. Such as the graphics processor unit GPU. In this article I will be outlining a couple of important aspects you need to know. And things you can do before you try and rectify this problem permanently yourself and warn you against other dangerous methods being touted about on the Internet.

In order to fix the Xbox 360 e74 error message or to stop it from appearing again. I did some research, after a few weeks of research on the Internet. Trying to find a way to fix my Xbox 360 I came across a number of red light fixes, and yes I did see the towel method like a hundred times. I even witnessed an Xbox 360 go up in smoke, under a towel in a video I found which was quite hilarious.

“Who in their right frame of mind, would cover their Xbox 360 over with a towel and expect to have a permanent fix?” I mean seriously common.

Another thing you could try is to ensure that none of the Xbox 360 ventilation panels are blocked or covered. Ensure that the console is not placed near an heat source, such as a radiator. Make sure the Xbox is not in a confined space, and is on a hard surface not a soft one such as long carpet fabric or bed. Xbox over heats fix

There are only really two things, you can do to fix the Xbox 360 e74 error problem permanently:

1) If your console is still under warranty you may send it back to Microsoft repair centre. Which will take roughly about 2 months to get your console back, excluding shipment fees and possible repair costs of around $140. If you are not prepared to wait, then you can try and repair it yourself by doing the following actions.

2) You can attempt DIY by getting hold of a good quality Xbox repair guide, essentially all you will have to do is get hold of some household tools such as a screwdriver set, thermal paste and follow the simple detailed instructions within the fast Xbox fixing guide. This can be accomplished within 2 hours quickly and easily. All you have to do is remove the console casing, apply some thermal paste in the correct location around the specified heat sinks. Mount the heat sink correctly around the CPU/GPU and then you are away. get Xbox 360 repair tools

Posted in Xbox 360

Xbox 360 DIY Fix

Posted by XboxMaster on May 13th, 2010 No Comments

Fortunately, like all problems, the ones that occur on the Xbox 360 comes with its own solutions. These can easily be provided by an experienced technician who possesses an extensive knowledge of how the Xbox 360 works. However, these usually requires taking your gaming console back to the store where it was bought and leaving it there to be repaired, This is quite ok except that it usually take a long time before it can be returned. This can prove to be very inconvenient especially when it has already been more than two weeks and your console is still not back within your hands.

These can be avoided by making use of another alternative that is also said to be effective and at the same time quick and easy. Also, this can be done in the comforts of the home and requires only the basic knowledge about electronics and computer systems as well as basic tools and equipment. Lastly, you will not experience the discomfort of waiting as well as be able to supervise the process yourself. This said alternative involves learning how to do an Xbox 360 diy fix. Fast xbox fixing guide

The first step in doing an Xbox 360 diy fix is to know the problem and all of its possible causes. This involves keen observations skills as you will need to know some of the possible signs and processes that come with each type of problems. Also, you need to know the difference between the different types of problem signs as some signs can be attributed to many different kinds of problems. One example of this is when the Xbox 360 console begins showing unreadable disks. These can be either related to a power failure or a hardware problem. Knowing all the possible relationships between the different types of problem signs is very crucial in the doing a very effective Xbox 360 diy fix.

Once the problem and it causes are known and identified, the next step in an Xbox 360 diy fix is to look for all possible solutions that can be used to solve the problem. Searching online is quite recommended as the net offers a wide variety of sites that can offer a list of possible Xbox 360 problems together with the corresponding solutions. Afterwards, a process of elimination is applied to help in choosing the solution that will work best for the problem that is specified. To make choosing a solution faster, it’s good to disregard those that offer senseless steps and advices. Instead, try to look for the solutions that has been tested and proven or has been used successfully by many people.

Lastly, the steps for the chosen solution must be followed precisely and correctly in order for your xbox diy fix to be complete. This can be determined once the problem has disappeared and the gaming console is now working again properly.

Three RED LIGHTS error fix Is your Xbox broken and only 3 red lights are flashing around the power button? These are typical signs for a so called general harware failure, also known as the “Red Ring of Death”. Basically that means a time-consuming repair in a qualified repair center including shipping your Xbox which usually takes several weeks!

Posted in Xbox 360